Removal and InstallationDiagnosis Procedure
Diagnosis Procedure
POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit. Refer
to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO
2.
NO>>
Repa ...
P0139 HO2S2
DTC Logic
DTC DETECTION LOGIC
The heated oxygen sensor 2 has a much longer switching time
between rich and lean than the air fuel ratio (A/F) sensor 1. The oxygen
storage capacity of the three way catalyst 1 causes the longer
switching time. To judge the malfunctions of heated oxygen sensor
2, ...
Steering switch (meter control switch) signal circuit
Diagnosis Procedure
Regarding wiring diagram information, refer to mwi-28, "wiring diagram".
1.Check combination meter input signal
Turn ignition switch on.
Measure voltage between the following terminals of the combination
meter.
Is the inspection result normal?
Yes &g ...