POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace damaged parts.
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.
Is any DTC detected?
YES >>Check the DTC. Refer to DTC Index.
NO >>Inspection End.
Component Function CheckLumbar Support System
System Description
System Description
DESCRIPTION
Lumbar support can operate regardless of the ignition
switch status, because power supply is always supplied to the lumber
support switch.
While operating the lumbar support switch, the
lumba ...
P2859 Clutch A Pressure
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P2859
CLUTCH A PRESSURE
(Clutch A Pressure Disengagement
Performance)
The detection conditions continuously for 200
msec or more un ...
Side Ventilator Grille
Removal and Installation
Removal and Installation
SIDE VENTILATOR GRILLE LH
REMOVAL
Remove
instrument lower panel LH. Refer to Removal and Installation.
Using a
suitable tool, release pawls and remove side ventilator grille
LH.
...