Nissan Sentra B18 (2020-2025) Service Manual: Washer Tube
Removal and Installation
REMOVAL
Partially remove the front fender protector (RH). Refer to Exploded View.
Remove the hood insulator. Refer to Exploded View.
Disconnect
the washer nozzle tubes (1) and (2) from check valve (A). 
Disconnect the washer tube from the washer pump.
Remove the washer tube from the clips and remove the washer tube.
INSTALLATION
Installation is in the reverse order of removal.
Note:
Fill washer tank with specified amount of fluid. Refer to Specifications.
Washer Nozzle
Removal and Installation
Removal and Installation
REMOVAL
Disconnect
the washer nozzle from the hood by pushing on the nozzle as
shown.
:
Front
Disconnect
the washe ...
Front Wiper Arm
...
Other materials:
Horn
WARNING
Do not disassemble or modify the horn. Doing so may affect the proper operation
of the supplemental front air bag system.
Tampering with the supplemental front air bag system may result in serious
personal injury.
To sound the horn on the Nissan Sentra, press near the horn icon lo ...
Diagnosis and Repair Work Flow
Work Flow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
It is also important to clarify the customer
concerns before starting the inspection. Interview the
customer about the concerns carefully and understand the
symptoms ful ...
Removal and Installation
Removal and Installation
REMOVAL
Remove the
bolts and separate the accelerator pedal assembly from the brake
pedal assembly. Refer to Exploded View. Note:
Leave the harness connector on the
accelerator pedal assembly.
Remove the
snap pin and the clevis pin from the brak ...
