REMOVAL
Remove the
bolts and separate the accelerator pedal assembly from the brake
pedal assembly. Refer to Exploded View. Note:
Leave the harness connector on the accelerator pedal assembly.
Remove the snap pin and the clevis pin from the brake pedal assembly and the brake booster push rod. Refer to Exploded View.
Remove the nut from the bottom of the brake pedal assembly.
Remove the nuts and the brake pedal assembly from the brake booster. Refer to Exploded View.
CAUTION:
Support the brake booster and master cylinder assembly to avoid dropping or contacting other parts.
Remove the stop lamp switch, if necessary.
Remove the brake pedal position switch, if necessary.
INSPECTION AFTER REMOVAL
Check the following items and replace the brake pedal if necessary.
Check the rocker arm (A) for damage and cracks.
Check the brake pedal rivet (B) for deformation.
INSTALLATION
Installation is in the reverse order of removal.
Apply multi-purpose grease to the clevis pin.
Inspect the brake pedal height after installing the brake pedal to the Nissan Sentra vehicle. Refer to Inspection.
CAUTION:
Replace the brake pedal if it has been dropped or sustained an impact.
Exploded View
Brake PipingSymptom diagnosis
Audio system
Symptom table
Related to audio
Related to hands-free phone
Before performing diagnosis, confirm that the cellular phone being used
by the customer is compatible with
the vehicle.
It is possible that a malfunction is occurring due to a version change
of the phone ...
Seats
WARNING
Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the ...
P0265 Fuel Injector (cylinder 2)
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...