S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Owner's Manual: Vents

Nissan Sentra side air vents
Side vents

Nissan Sentra center air vents
Center vents

Adjust the airflow direction in the Nissan Sentra by moving the vent sliders or rotating the vent knobs.

For side vents: Move the slider toward to close the vent, and away from to open it.

For center vents: Rotate the control knob clockwise to close the vent and counterclockwise to open it.

    Moving Object Detection (MOD)
    CAMERA button WARNING Failure to follow the warnings and instructions for proper use of the Moving Object Detection (MOD) system could result in serious injury or death. The MOD...
    Heater and air conditioner (manual)
    Fan speed control dial Heated seat switches (if so equipped) Front defroster button Rear window and outside mirror defroster switch (if so equipped) Air recirculation button MAX...

    Other materials:

    NISSAN Intelligent Key
    WARNING Radio waves may adversely affect electronic medical equipment. Drivers or passengers who use a pacemaker or similar medical device should consult the device manufacturer regarding possible effects before using the NISSAN Intelligent Key in the Nissan Sentra. The Intelligent Ke ...

    Evap Control System Pressure Sensor
    Component Inspection Component Inspection CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR Turn ignition switch OFF. Remove EVAP control system pressure sensor with its harness connector connected from EV ...

    Before Replacing ECM
    SAVE ECM DATA With CONSULT Turn ignition switch OFF. Reconnect all harness connectors disconnected. Turn ignition switch ON. Select “SAVING DATA FOR REPLC ...