Nissan Sentra B18 (2020-2025) Service Manual: Vacuum Lines
Exploded View
Exploded View
|
1. |
Vacuum hose |
2. |
Hose clamp |
3. |
Brake booster |
|
A. |
To vacuum pump. Refer to Exploded View. |
Removal and Installation
Removal and Installation
REMOVAL
Separate the vacuum hose from the brake booster. Refer to Exploded View.
Remove the vacuum hose from the vacuum pump.
INSTALLATION
Installation is in the reverse order of removal.
-
Install the vacuum hose in the correct position. Refer to Exploded View.
-
Install the vacuum hose onto the vacuum pump to the specified length (A) or further as shown.
(A)
: 24 mm (0.94 in) or more
-
Install the hose clamp (1) onto the vacuum hose (2) to the specified length (A) from the hose end as shown.
(A)
: 4 – 8 mm (0.16 – 0.31 in)
CAUTION:
Do not use lubricating oil during installation.
Other materials:
P2297 Air Fuel Ratio Sensor 1
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
System Description
Component Parts
Rear View Monitor with 8" Color Display
Component Parts Location
Component Parts
Location
No.
Component
Function
...
U1112-24 Deceleration Request Signal
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
...