Nissan Sentra B18 (2020-2025) Service Manual / Driver Information & Multimedia / Meter, Warning Lamp & Indicator :: Type B / Dtc/circuit Diagnosis / U1321-55 Configuration Unfinished

Nissan Sentra B18 (2020-2025) Service Manual: U1321-55 Configuration Unfinished

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
U1321–55	Config unfinished (Configuration unfinished)	Diagnosis condition	When ignition switch is ON.
		Signal (terminal)	—
		Threshold	Configuration is incomplete
		Diagnosis delay time	—

POSSIBLE CAUSE

The Nissan Sentra vehicle setting of combination meter is incomplete.

FAIL-SAFE

—

Confirmation Procedure

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch OFF.
  2. Ignition switch ON.
  3. Select “Self Diagnostic Result” mode of “METER/M&A”.
Is DTC U1321-55 detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

PERFORM CONFIGURATION OF COMBINATION METER
1. CONSULT
  
  Perform configuration of combination meter. Refer to Work Procedure.
>>
GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
1. Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.
Is DTC U1321-55 detected?
YES>>
Replace combination meter. Refer to Removal and Installation.
NO>>
Inspection End.

 B2267-29 Engine Speed

Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B2267-29 TACHO METER (Tacho meter) Diagnosis ...

 U2118-87 Can Comm Circuit

Dtc Description DTC Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-Nissan Sentra vehicle multiplex communicati...

Other materials:

Egr Cooler
Exploded View Exploded View 1. Vacuum delay valve bracket 2. EGR cooler bracket ...

Basic Inspection
Diagnosis and Repair Workflow Work Flow Work Flow OVERALL SEQUENCE DETAILED FLOW GET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/ma ...

U1010 Control Unit(can)
Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...