Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Multi Remote Ent

Consult Function (bcm - Multi Remote Ent)

CONSULT Function (BCM - MULTI REMOTE ENT)

DATA MONITOR

Note:

The following table includes information (items) inapplicable to this Nissan Sentra vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item

Description

STOP/START SW

[On/Off]

Indicates [On/Off] condition of start/stop off switch

IGN SW

[On/Off]

Indicates [On/Off] condition of ignition switch

START SW

This item is displayed, but cannot be monitored

    Air Pressure Monitor
    Consult Function (bcm - Air Pressure Monitor) CONSULT Function (BCM - AIR PRESSURE MONITOR) Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following f...

    Other materials:

    P0101 Maf Sensor
    Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...

    M/t Oil
    Inspection Inspection OIL LEAKAGE Make sure that gear oil is not leaking from transaxle or around it. OIL LEVEL Remove filler plug (1) and gasket from transaxle case. Check the oil level from filler plug mounting hole as shown. CAUTION: Do not start engine whi ...

    Trip computer
    1. Vehicle speed The vehicle speed screen shows the current speed of the Nissan Sentra as well as the average vehicle speed calculated since the last reset. Average vehicle speed: Press the OK button on the steering wheel to open the drive computer Reset menu, then follow the on-screen in ...