Dtc Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|---|---|---|---|
|
U1300–01 |
AV communication circuit (AV communication circuit) |
Diagnosis condition |
When ignition switch is ON. |
|
Signal (terminal) |
— |
||
|
Threshold |
— |
||
|
Diagnosis delay time |
— |
||
POSSIBLE CAUSE
AV communication circuit
AV control unit
Combination meter
FAIL-SAFE
AV communication is inoperative.
Dtc Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Ignition switch OFF and wait at least 30 seconds.
Ignition switch ON and wait at least 30 seconds or more.
Select “Self Diagnostic Result” mode of “MULTI AV”.
Check DTC.
Is DTC U1300–01 detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
Diagnosis Procedure
CHECK SELF DIAGNOSTIC RESULT
CONSULT
Check if any DTC other than “U1300–01” is detected in “Self diagnostic result” mode of “MULTI AV”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace AV control unit. Refer to Removal and Installation.
U1231 Amplifier Temperature
U1600 Front Left Door Speaker OutDiagnosis system (BCM) (without intelligent key system)
Common item
Common item : consult function (bcm - common item)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode
Description
ECU identification
The BCM part number is displayed.
Self Diagnostic Result
...
B0050-29 Front Seat Belt Buckle Switch
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC detecting condition
...
Making a call
To make a call from a phone connected to the
vehicle’s Bluetooth® Hands-Free Phone System:
NOTE:
Available commands different if system is
in Manual Control mode. See “Manual Control”
in this section for more information.
Press the button.
The system will prompt you for a command. ...