Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation - Seat Cushion Assembly
REMOVAL
Lift up the seat cushion assembly close to the front edge (B) to release it from the seat cushion hooks (A) (one for each side).
Remove the rear seatback assembly. Refer to Removal and Installation - 60:40 Split Seatback.
Remove the
seat cushion assembly. 
INSTALLATION
Installation is in the reverse order of removal.
Exploded View
Exploded View
60:40 SPLIT SEATBACK
1.
Seatback striker
...
Removal and Installation - 60:40 Split Seatback
Removal and Installation - 60:40 Split Seatback
REMOVAL
Place the
rear seatback assembly in the folded down position.
Release the
hook fasteners (A) in the lower corners of the rear s ...
Other materials:
Basic inspection
Diagnosis and repair workflow
Work flow
OVERALL SEQUENCE
DETAILED FLOW
1.GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition
and the environment when the
incident/malfunction occurred).
>> GO TO 2
2.CONFIRM THE SYMPTOM
Try to ...
Parking Brake Switch Signal Circuit
Component Function Check
Component Function
Check
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
Select “PKB SW” in “Data Monitor” mode of “METER/M&A”.
Check tha ...
Symptom diagnosis
Nissan vehicle immobilizer systemnats
symptoms
Symptom Table
Note:
Before performing the diagnosis in the following table, check
“SEC-171, "Work Flow"”.
Check that vehicle is under the condition shown in “Conditions of
vehicle” before starting diagnosis, ...
