Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation - Inner Socket
REMOVAL
Remove boot. Refer to Removal and Installation - Boot.
Remove inner socket. Refer to Exploded View.
INSTALLATION
Apply medium strength thread locker to threads of inner socket. Install inner socket and tighten to specified torque. Refer to Exploded View.
Install boot. Refer to Removal and Installation - Boot.
Install outer socket. Refer to Removal and Installation — Outer socket.
Removal and Installation - Boot
Removal and Installation - Boot
REMOVAL
Remove
outer socket. Refer to Removal and Installation - Outer
socket.
Remove
inner socket lock nut.
Remove
small boot clamp and la ...
Other materials:
Diagnosis Procedure
Diagnosis Procedure
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode
of “EPS/DAST 3”.
...
Removal and Installation
Removal and
Installation
REMOVAL
Remove front pillar finishers (LH/RH).
Refer to Removal and Installation.
Remove front seat assemblies. Refer
to the following.
Removal and Installation - Seat Assembly (Driver Seat).
Removal and Installation - Se ...
P1715 Input speed sensor
Description
ECM receives input speed sensor signal from TCM through CAN communication
line. ECM uses this signal for
engine control.
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P1715 is displayed with DTC UXXXX, first perform the trouble
diagnosis for DTC UXXXX.
If DTC P1715 is displa ...
