REMOVAL
Remove outer socket. Refer to Removal and Installation - Outer socket.
Remove inner socket lock nut.
Remove small boot clamp and large boot clamp.
CAUTION:
Do not reuse boot clamps.
Remove boot.
CAUTION:
Do not reuse boot.
INSTALLATION
Install
large end of boot (1) onto steering gear housing.
CAUTION:
Do not reuse boot.
Apply silicone grease between the inner socket and small end of boot (2).
CAUTION:
To prevent boot deformation or damage during toe-in adjustment, apply silicone grease between the inner socket and small end of boot.
Install small end of boot to inner socket boot mounting groove.
Install small boot clamp (B).
CAUTION:
Do not reuse small boot clamp.
Install large boot clamp (A).
CAUTION:
Do not reuse large boot clamp.
Partially thread the inner socket lock nut on the inner socket.
Install outer socket. Refer to Removal and Installation - Outer socket.
Removal and Installation - Outer Socket
Removal and Installation - Inner SocketBulb Specifications
Bulb Specifications
Item
Wattage (W)*
Front room/Map lamp assembly
8
Vanity mirror lamp (if ...
Parking Brake System
Inspection
Inspection
INSPECTION
Lever Stroke
Operate the
parking brake lever with a force of 196 N (20.0 kg-f, 44.1 lb-f).
Check that the lever stroke is within the specified number of
notches. (Check it by listening to the clicks of the
ratchet.)
...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system ...