Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation - Disc Brake
REMOVAL
Remove rear hub assembly. Refer to Removal and Installation.
Place a suitable jack under the outer end of the rear lower link to relieve the coil spring tension.
Warning:
Place a suitable jack under the outer end of the rear lower link.
CAUTION:
Do not damage the rear lower link with suitable jack.
Remove the front and rear lower link bolts from the rear knuckle.
Remove the upper arm bolt from the rear knuckle.
Remove the rear knuckle from the Nissan Sentra vehicle.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the final tightening of the parts under the unladen conditions with the tires on the ground.
Exploded View
Exploded View
With Drum Brake
1.
Rear suspension assembly
...
Removal and Installation - Drum Brake
Removal and Installation - Drum Brake
REMOVAL
Remove rear
hub assembly. Refer to Removal and Installation.
Place a
suitable jack under the outer end of the rear lower link to relieve
...
Other materials:
Component Parts
Adas Control Unit
Component Parts Location
Component Parts
Location
A.
Instrument panel center area
(view with instrument panel
removed)
...
Diagnosis System (ivc)
Consult Function
CONSULT Function
CONSULT FUNCTIONS
CONSULT performs the following functions via
communication with the TCU.
Direct Diagnostic Mode
Description
...
Does Not Operate
Diagnosis Procedure
Diagnosis Procedure
VDC function, TCS function, ABS function, EBD
function or brake assist function does not operate.
CAUTION:
VDC function, TCS function, ABS function, EBD
function and brake assist function never operate when the Nissa ...
