Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation - Armrest Assembly
REMOVAL
Note:
RH shown, LH similar.
Place the rear seatback assembly (RH) in the folded down position.
Release the
J-hook retainer (A) and unzip the seatback trim zippers (B).
Remove rear seatback insulator (RH).
Using a suitable tool remove clip then armrest hinge finisher. Refer to Exploded View.
Remove nuts
(A) then the armrest assembly (1).
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation - 60:40 Split Seatback
Removal and Installation - 60:40 Split Seatback
REMOVAL
Place the
rear seatback assembly in the folded down position.
Release the
hook fasteners (A) in the lower corners of the rear s ...
Removal and Installation - Rear Seat Bolster
Removal and Installation - Rear Seat Bolster
REMOVAL
Warning:
Do not leave any objects (screwdrivers, tools,
etc.) on the rear seat bolster during seat repair. It can lead to
pe ...
Other materials:
Operation
4.2 Inch Information Display
Operation
Operation
SWITCH NAME AND FUNCTION
No.
Switch name
Description
...
Dtc Confirmation Procedure
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION
CONSULT
Ignition switch ON.
CAUTION:
Never start the engine.
...
U2140-87 Can Comm Err (ecm)
Dtc Description
DTC Description
DESCRIPTION
CAN (Controller Area Network) is a serial communication
system for real time application. It is an on-Nissan Sentra vehicle multiplex communication
system with high data communication speed and excellent error detection
ability. Many ele ...
