S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation

Combination Meter

Exploded View

Exploded View

1.

Front cover

2.

Combination meter

Pawl

Removal and Installation

Removal and Installation

REMOVAL

CAUTION:

Be sure to perform the "ADDITIONAL SERVICE WHEN REPLACING COMBINATION METER". Refer to Work Procedure.

Note:

Do not swap combination meter modules between Nissan Sentra vehicles for any reason.

Remove cluster lid A. Refer to Removal and Installation.

Remove the screws (A) from the combination meter (1).

Disconnect harness connector from the combination meter (1) and remove.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Be sure to perform the "ADDITIONAL SERVICE WHEN REPLACING COMBINATION METER". Refer to Work Procedure.

Note:

Do not swap combination meter modules between Nissan Sentra vehicles for any reason.

Steering Switches

Removal and Installation

Removal and Installation

For removal and installation of the steering switch, refer to Removal and installation (DISPLAY AUDIO WITH 7" COLOR DISPLAY), Removal and installation (DISPLAY AUDIO WITHOUT BOSE WITH 8" COLOR DISPLAY), or Removal and installation (DISPLAY AUDIO WITH BOSE WITH 8" COLOR DISPLAY).

Illumination Control Switch

Removal and Installation

Removal and Installation

For removal and installation of the illumination control switch, refer to Removal and Installation.

Trip Reset Switch

Exploded View

Exploded View

1.

Trunk lid opener switch

2.

ECO mode switch

3.

Illumination control switch

4.

Trip reset switch

5.

Instrument lower panel LH

Pawl

Removal and Installation

Removal and Installation

REMOVAL

Remove the instrument lower panel LH. Refer to Removal and Installation.

Release pawls using suitable tool and remove the trip reset switch from switch panel.

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

    Symptom Diagnosis
    The Fuel Gauge Indicator Does Not Operate Description Description Fuel gauge will not indicate from a certain position. Diagnosis Procedure Diagnosis Procedure PERFORM COMBINATI...
    Unit Disassembly and Assembly. Combination Meter
    Combination Meter Exploded View Exploded View 1. Front cover 2. Combination meter Pawl Disassembly and Assembly Disassembly and Assembly DISASSEMBLY CAUTION: Do not touch the di...

    Other materials:

    Egr Cooler
    Exploded View Exploded View 1. Vacuum delay valve bracket 2. EGR cooler bracket ...

    C1040-04 Cut Valve
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen item (Trouble diagnosis content) DTC detection condition ...

    LATCH (Lower Anchors and Tethers for CHildren) system
    LATCH system lower anchor locations Your Nissan Sentra is equipped with dedicated anchor points designed for use with LATCH system–compatible child restraints. This system may also be referred to as ISOFIX or ISOFIX-compatible. When using the LATCH system, a vehicle seat belt is not req ...