Nissan Sentra B18 (2020-2025) Service Manual: Unit Disassembly and Assembly. Combination Meter
Combination Meter
Exploded View
|
1. |
Front cover |
2. |
Combination meter |
|
Pawl |
Disassembly and Assembly
DISASSEMBLY
CAUTION:
-
Do not touch the display, pointer, the inside of front cover and the printed area of the dial during the work.
-
Keep away from magnetic sources.
-
Do not damage the combination meter lens.
Release the
pawls. 
|
|
: Pawl |
Remove the front cover (1).
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
-
Do not touch the display, pointer, the inside of front cover and the printed area of the dial during the work.
-
Keep away from magnetic sources.
-
Do not damage the combination meter lens.
Other materials:
Wiring diagram
Wiper and washer system
Wiring diagram - with intelligent key
Wiring diagram - without intelligent key
...
Adjusting the screen
Without Navigation System
The procedure for adjusting the quality of the
screen differs depending on the type of screen
present on the vehicle.
For vehicles without Navigation System:
Press the ENTER/SETTING button.
Turn the TUNE-SCROLL knob to highlight
the “Brightness” or “ ...
Precaution for Seat Belt Service
CAUTION:
Before removing the seat belt pre-tensioner assembly, turn the
ignition switch OFF, disconnect both
battery terminals and wait at least three minutes. For approximately three
minutes after the battery
terminals have been removed, it is still possible for the air bag and seat
...