Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove trunk lid finisher. Refer to Removal and Installation.
Remove rear air spoiler nuts. Refer to Exploded View.
Insert suitable tool between trunk lid and rear air spoiler and carefully lift rear air spoiler to access double-sided tape. Refer to Exploded View.
CAUTION:
-
Use suitable tools made of material that will not damage parts.
-
Do not lift rear air spoiler with excessive force that may damage parts.
Insert suitable tool under rear air spoiler and release double-sided tape. Refer to Exploded View.
Remove rear air spoiler.
INSTALLATION
Remove trunk lid finisher (if necessary). Refer to Removal and Installation.
For new
installation, install rear air spoiler drill template on trunk lid
and drill rear air spoiler mounting holes.
Note: 
Be careful to follow all directions provided with drill template.
Install rear air spoiler, and nuts, to trunk lid. Tighten nuts to specification. Refer to Exploded View.
CAUTION:
-
Before installing rear air spoiler, clean trunk lid mounting surface with isopropyl alcohol or equivalent.
-
Replace double-sided tape if rear air spoiler is reused.
-
Do not wash or expose Nissan Sentra vehicle to a wet environment within 24 hours of installation.
For new installation, replace trunk lid torsion bar (LH/RH). Refer to Removal and Installation.
Install trunk lid finisher. Refer to Removal and Installation.
Exploded View
Exploded View
1.
Trunk lid
2.
...
Emblem
...
Other materials:
Hood Switch
Component Function Check
Component Function Check
CHECK FUNCTION
CONSULT
Select “Hood switch” and “HOOD
SW (CAN)” in “Data Monitor” mode of “IPDM
E/R”.
...
C1f00-49 Control Unit
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
...
Controls
Fan control dial
The fan control dial turns the fan on and off, and
controls fan speed.
Air flow control buttons
The air flow control buttons allow you to select
the air flow outlets.
MAX — Air flows from center and side
A/Cvents with maximum cooling.
— Air flows from center and side
v ...
