Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
CAUTION:
-
When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
-
Do not damage the door panel.
REMOVAL
Using a suitable tool, release pawls and remove inside door handle escutcheon. Refer to Exploded View.
Remove bolt
(A).
Remove rear power window switch. Refer to Removal and Installation.
Remove bolt
(A).
Using a
suitable tool, release clips of rear door finisher. Refer to Exploded View.
Remove rear door finisher as
shown.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that clips are accurately aligned with the holes on the door panel, then press in.
Exploded View
Exploded View
1.
Rear door panel
2.
...
Body Side Trim
...
Other materials:
P2b96 Injection Pulse
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Eps branch line circuit
Diagnosis Procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the eps control unit for damage,
bend and loose connection (unit
side and connector side).
Is the inspection result norm ...
Turn Signal Lamp
Component Inspection
Component Inspection
CHECK TURN SIGNAL LAMP
Ignition switch OFF.
Disconnect front combination lamp connector, rear
combination lamp (body side) connecto ...
