REMOVAL
Separate the vacuum hose from the brake booster. Refer to Exploded View.
Remove the vacuum hose from the vacuum pump.
INSTALLATION
Installation is in the reverse order of removal.
Install the vacuum hose in the correct position. Refer to Exploded View.
Install the vacuum hose onto the vacuum pump to the specified length (A) or further as shown.
|
(A) |
: 24 mm (0.94 in) or more |
Install the hose clamp (1) onto the vacuum hose (2) to the specified length (A) from the hose end as shown.
|
(A) |
: 4 – 8 mm (0.16 – 0.31 in) |
CAUTION:
Do not use lubricating oil during installation.
Exploded View
Front Brake PadWindshield-washer fluid
Windshield-washer fluid reservoir
Fill the windshield-washer fluid reservoir periodically.
To fill the windshield-washer fluid reservoir, lift
the cap off the reservoir and pour the windshieldwasher
fluid into the reservoir opening.
Add a washer solvent to the washer for better
cleanin ...
Inspection
Inspection
INSPECTION AFTER DISASSEMBLY
Check the following items and replace the parts
if necessary.
Strut
Check the strut for oil leaks, deformation,
cracks, or damage.
Check the piston rod for damage, uneven wear, or
distortion.
St ...
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...