Nissan Sentra B18 (2020-2025) Service Manual: Inspection
INSPECTION AFTER DISASSEMBLY
Check the following items and replace the parts if necessary.
Strut
-
Check the strut for oil leaks, deformation, cracks, or damage.
-
Check the piston rod for damage, uneven wear, or distortion.
Strut Mount Insulator and bound bumper
Check the strut mount insulator and the bound bumper for cracks, wear, or damage.
Coil Spring
Check the coil spring for cracks, wear, or damage.
INSPECTION AFTER INSTALLATION
Check the wheel sensor harness to be sure the connectors are fully seated.
Check the neutral position of the steering angle sensor. Refer to Description.
Check the wheel alignment. Refer to Inspection.
Disassembly and Assembly
Disassembly and Assembly
DISASSEMBLY
CAUTION:
Do not damage the piston rod when removing
components from the front coil spring and strut.
Install
Tool (A) to the front co ...
Disposal
Disposal
Set the
strut horizontally with the piston rod fully extended.
Drill a 2
– 3 mm (0.08 – 0.12 in) hole at the position ()
from top as shown to release gas gradually.
...
Other materials:
Unit removal and installation
TRANSAXLE ASSEMBLY
Exploded View
Transaxle assembly
Refer to INSTALLATION
Removal and Installation
WARNING:
Do not remove the radiator cap when the engine is hot. Serious burns
could occur from high pressure
coolant escaping from the radiator. Wrap a thick cloth around the cap. ...
Description
Description
All doors do not lock/unlock using Intelligent
Key button. (One Intelligent Key has the symptom, other keys
operate normally.)
Note:
Before starting diagnosis check that Nissan Sentra vehicle
condition is as shown in “Conditions of vehicle”, and
check each symp ...
P0604 Ecm
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
