Nissan Sentra B18 (2020-2025) Service Manual: Rear View Camera
Removal and Installation
Removal
Remove trunk lid finisher. Refer to Removal and Installation.
Remove
trunk lid damper bolts (A) and trunk lid damper (1). 
Disconnect the rear view camera harness connector.
Using a
suitable tool, release pawl and remove rear view camera (1). 
Installation
Installation is in the reverse order of removal.
Note:
Perform camera image calibration. Refer to Description.
Av Control Unit
Exploded View
Exploded View
1.
Audio unit bracket (LH)
...
Other materials:
Removal and Installation
Removal and
Installation
CVT MODELS
REMOVAL
Using a suitable tool, release clips
and remove the center console side finishers [1 (LH/RH)].
Note:
LH shown; RH similar
: Clip
Remove shift selector finisher using
the following steps:
Remove the CVT shif ...
Fuel Level Sensor Signal Circuit
Component Function Check
Component Function
Check
COMBINATION METER INPUT SIGNAL
CONSULT
Select “FUEL METER” in “Data Monitor” mode of “METER/M&A”.
Compare the ...
Preparation
Special Service Tools
Special Service Tools
The actual shape of the tools may differ from
those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
...
