Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation

Av Control Unit

Exploded View

Exploded View

1.

Audio unit bracket (LH)

2.

Audio unit

3.

Audio unit bracket (RH)

Removal and Installation

Removal and Installation

REMOVAL

CAUTION:

When replacing AV control unit, perform "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT". Refer to Description.

Disconnect the negative battery terminal. Refer to Battery Disconnect.

Remove cluster lid C. Refer to Removal and Installation

Remove the AV control unit screws, then pull out the AV control unit.

Disconnect the harness connectors from the AV control unit and remove.

If necessary, remove the AV control unit bracket (LH/RH) screws and the AV control unit brackets (LH/RH).

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

When replacing AV control unit, perform "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT". Refer to Description.

Rear View Camera

Removal and Installation

Removal and Installation

Removal

Remove trunk lid finisher. Refer to Removal and Installation.

Remove trunk lid damper bolts (A) and trunk lid damper (1).

Disconnect the rear view camera harness connector.

Using a suitable tool, release pawl and remove rear view camera (1).

Installation

Installation is in the reverse order of removal.

Note:

Perform camera image calibration. Refer to Description.

    Symptom Diagnosis. Rear View Monitor System
    Rear View Monitor System Symptom Table Symptom Table REAR VIEW MONITOR SYSTEM Symptoms Check items Probable malfunction location Rear view camera is inoperative. Camera image si...

    Other materials:

    Back-Up Lamp Relay Circuit
    Component Function Check Component Function Check CHECK BACK-UP LAMP OPERATION Ignition switch ON. With operating the shift selector, check that the back-up lamp is turn ...

    Glass & Window System. Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses
    Squeak and Rattle Trouble Diagnoses Work Flow Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occu ...

    Hazard Switch
    Component Inspection Component Inspection CHECK HAZARD SWITCH Ignition switch OFF. Disconnect hazard switch connector. Check continuity between hazar ...