Nissan Sentra B18 (2020-2025) Service Manual: Rear Combination Lamp (trunk Lid Side)
Exploded View
|
1. |
Rear combination lamp (trunk lid side) |
2. |
Tail lamp bulb |
3. |
Rear combination lamp (trunk lid side) harness |
|
4. |
Back-up lamp bulb |
Disassembly and Assembly
DISASSEMBLY
Warning:
Do not touch bulb while it is lit or right after being turned off. Burning may result.
CAUTION:
-
Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.
-
Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of the lamp.
Remove rear combination lamp (trunk lid side). Refer to Removal and Installation.
Rotate back—up lamp bulb socket counterclockwise to remove from rear combination lamp (trunk lid side).
Remove the back—up lamp bulb from bulb socket.
Rotate tail lamp bulb socket counterclockwise to remove from rear combination lamp (trunk lid side).
Remove the tail lamp bulb from bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
Rear Combination Lamp (body Side)
Exploded View
Exploded View
1.
Rear combination lamp
...
Other materials:
Removal and Installation - 60:40 Split Seatback
Removal and Installation - 60:40 Split Seatback
REMOVAL
Place the
rear seatback assembly in the folded down position.
Release the
hook fasteners (A) in the lower corners of the rear seatback
assembly.
Remove the
rear seatback assembly bolts (B) from the seatback hinge bra ...
U0284 Active Grille Shutter
Dtc Description
DTC Description
DTC DETECTION LOGIC
When ECM cannot receive the engine communication signal from
active grille shutter.
DTC No.
CONSULT screen terms
(Trouble diagnosis
...
P062f Ecm
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
