Nissan Sentra B18 (2020-2025) Service Manual: Procedure for Temporarily Disabling the Ignition Battery Saver System

Work Procedure (with Cvt)

• The ignition battery saver system can be temporarily disabled, without using CONSULT, to prevent it from functioning when performing trouble diagnosis.

  Note:

  When ignition battery saver is disabling, operation of the push-button ignition switch is not accepted for less than 2 seconds.

• To resume ignition battery saver system, press and hold the push-button ignition switch continuously for 3 seconds or more when all of the following conditions are satisfied (push-button ignition switch ON -> OFF):

  • Shift selector: Except P or N position

  • Brake pedal: Not depressed

1. WORK PROCEDURE

   1. 1. Push-button ignition switch OFF.

      2. Without depressing the brake pedal, press the push-button ignition switch.

      3. With depressing the brake pedal, shift the shift selector in another position except P or N.

      4. Without depressing the brake pedal, press and hold the push-button ignition switch continuously for 3 seconds or more.

      5. Shift the shift selector to P position to stop the P position warning (buzzer).

         Note:

         If you are not concerned about the P position warning (buzzer) volume and battery discharge, this is not a necessary step.

   YES >>

   Work End.

Work Procedure (with M/t)

• The ignition battery saver system can be temporarily disabled, without using CONSULT, to prevent it from functioning when performing trouble diagnosis.

  Note:

  When ignition battery saver is disabling, operation of the push-button ignition switch is not accepted for less than 2 seconds.

• To resume ignition battery saver system, press and hold the push-button ignition switch continuously for 3 seconds or more when all of the following conditions are satisfied (push-button ignition switch ON -> OFF):

  • Shift selector: Except neutral position

  • Brake pedal: Not depressed

1. WORK PROCEDURE

   1. 1. Push-button ignition switch OFF.

      2. With depressing the clutch pedal, shift the shift selector in another position except neutral.

      3. Without depressing the brake pedal, press and hold the push-button ignition switch continuously for 3 seconds or more.

   YES >>

   Work End.

© 2014-2026 Copyright www.nisentra.com