Nissan Sentra B18 (2020-2025) Service Manual: Parking Brake Rear Cable
Removal and Installation
REMOVAL
Remove the cup holder finisher. Refer to Exploded View.
Loosen the
adjusting nut (A). 
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
Note:
It is not necessary to remove the front parking brake cable.
Pull the
equalizer (A) in the rearward direction and then in the upward
direction in order to separate the rear parking brake cables [LH/RH
(2)] from the front parking brake cable (1). 
CAUTION:
To prevent damage to parts, do not bend the parking brake cables.
Remove the rear under cover (LH/RH). Refer to Removal and Installation.
Reposition the exhaust heat insulator.
Remove the rear parking brake cable from the underbody bracket.
Separate the rear parking brake cable from the toggle lever. Refer to Exploded View.
Remove the bolts from the rear parking brake cable. Refer to Exploded View.
Remove the rear parking brake cable from the Nissan Sentra vehicle.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the adjustment. Refer to Adjustment.
-
Perform the inspection. Refer to Inspection.
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
Parking Brake Front Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
cup holder finisher. Refer to Exploded View.
Remove the
adjusting nut (A).
CAUTION:
Do not reuse t ...
Parking Brake Switch
Removal and Installation
Removal and Installation
REMOVAL
Remove the
cup holder finisher. Refer to Exploded View.
Disconnect
the harness connector from the parking brake switch.
...
Other materials:
8ch Can Gateway
Removal and Installation
Removal and Installation
CAUTION:
If replacing 8CH CAN gateway, Perform "ADDITIONAL
SERVICE WHEN REPLACING 8CH CAN GATEWAY". Refer to Work Procedure.
REMOVAL
Remove
instrument panel assembly. Refer to Removal and Installation.
Remove side ...
C1704, C1705, C1706, C1707 Low tire pressure
DTC Logic
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTCs
Register ...
Diagnosis System (av Control Unit)
Description
Description
The AV control unit on board diagnosis performs
the following functions listed in the table below:
Mode
Description
Self D ...
