Nissan Sentra B18 (2020-2025) Service Manual: Parking Brake Front Cable
Removal and Installation
REMOVAL
Remove the cup holder finisher. Refer to Exploded View.
Remove the
adjusting nut (A). 
CAUTION:
Do not reuse the adjusting nut.
Pull the
equalizer (A) in the rearward direction and then in the upward
direction in order to separate the rear parking brake cables [LH/RH
(2)] from the front parking brake cable (1). 
CAUTION:
To prevent damage to parts, do not bend the parking brake cables.
Remove the front parking brake cable. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the adjustment. Refer to Adjustment.
-
Perform the inspection. Refer to Inspection.
CAUTION:
Do not reuse the adjusting nut.
Parking Brake Control
Exploded View
Exploded View
1.
Parking brake lever
assembly
...
Parking Brake Rear Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
cup holder finisher. Refer to Exploded View.
Loosen the
adjusting nut (A).
CAUTION:
Do not reuse t ...
Other materials:
Washer Fluid Level Switch Circuit
Diagnosis Procedure
Diagnosis Procedure
Transmits the washer level switch signal to the
combination meter.
CHECK WASHER FLUID LEVEL SWITCH
SIGNAL CIRCUIT
Ignition switch OFF.
...
Special Service Tools
Special Service
Tools
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
Description
...
Component Parts
Meter System
Component Parts Location
Component Parts
Location
MODELS WITH CVT
A.
View of engine assembly removed
...
