Nissan Sentra B18 (2020-2025) Service Manual: Operation
Automatic Speed Control Device (ascd)
Switch Name and Function
Switch Name and Function
SWITCHES AND INDICATORS
|
|
On the combination meter |
|
On the steering wheel |
||
|
|
ASCD indicator |
|
CANCEL switch |
|
RES + switch (RESUME/ACCELERATE) |
|
|
SET - switch (SET/COAST) |
|
MAIN switch |
SET SPEED RANGE
ASCD system can be set the following Nissan Sentra vehicle speed.
|
Minimum speed (Approx.) |
Maximum speed (Approx.) |
|---|---|
|
40 km/h (25 MPH) |
144 km/h (89 MPH) |
SWITCH OPERATION
|
Item |
Function |
|---|---|
|
CANCEL switch |
Cancels the cruise control driving. |
|
RES − switch |
|
|
SET + switch |
|
|
MAIN switch |
Master switch to activate the ASCD system. |
Refer to System Description for ASCD operating instructions.
Idle Start/stop System
Switch Name and Function
Switch Name and Function
SWITCHES AND INDICATORS
|
1. |
Start/Stop indicator |
2. |
Start/Stop OFF switch |
||
|
A. |
On the information display |
B. |
Lower instrument panel (driver side) |
SYSTEM CONTROL CONDITION DISPLAY
Start/Stop Indicator Status (Information Display)
|
System condition |
Nissan Sentra Vehicle condition |
Warning chime |
Start/Stop indicator |
|
|---|---|---|---|---|
|
Operate |
Normal |
— |
![]() |
|
|
The engine does not restart |
With intelligent key system |
Hood open*1 |
Sound |
![]() |
|
The idle start/stop system is OFF |
When the start/stop OFF switch is ON.*2 |
— |
![]() |
|
|
When the brake pedal is not enough pressure. |
— |
Note:
This display appears when Fuel saved and engine stop time is selected on the Nissan Sentra vehicle information display.    |
||
|
When A/C is prioritized. |
— |
Note:
This display appears when Fuel saved and engine stop time is selected on the Nissan Sentra vehicle information display. |
||
|
When the steering wheel is being operated. |
— |
Note:
This display appears when Fuel saved and engine stop time is selected on the Nissan Sentra vehicle information display. |
||
|
Others |
— |
— |
||
|
The idle start/stop system is ON. |
When the start/stop OFF switch is OFF.*3 |
— |
![]() |
|
|
Fail-Safe |
Malfunction of idle start/stop system |
— |
![]() |
|
*1: Engine is stalled after alert for 1.5 seconds.
*2: This is indicated only for 1.5 seconds after the start/stop OFF switch is turned from OFF to ON.
*3: This is indicated only for 1.5 seconds after the start/stop OFF switch is turned from ON to OFF.
Other materials:
Basic Inspection
Camshaft Valve Clearance
Inspection and Adjustment
Inspection and Adjustment
INSPECTION
Perform inspection as follows after removal,
installation or replacement of camshaft or valve-related parts, or
if there is unusual engine conditions regarding valve
clearance.
Remove
r ...
Optical Sensor Circuit
Component Function Check
Component Function
Check
CHECK OPTICAL SENSOR SIGNAL
Ignition switch ON.
Turn lighting switch AUTO.
With the optical sen ...
Ecu Diagnosis Information. Bcm, Ipdm E/r
Bcm, Ipdm E/r
List of Ecu Reference
List of ECU Reference
ECU
Reference
BCM
Values on the Diagnosis Tool
...










Note:
Note:
Note: 
