Nissan Sentra B18 (2020-2025) Service Manual: Led Headlamp Operation Inspection

Nissan Sentra B18 (2020-2025) Service Manual / Driver Controls / Exterior Lighting System :: Led Headlamp / Basic Inspection / Led Headlamp Operation Inspection

Work Procedure

Work Procedure

CHECK START
1. 1. In the cool LED status (wait for more than 10 minutes after turning headlamp OFF), turn ON and turn OFF headlamp for the several times. Check that headlamp operates normally each time.
  2. In the cool LED status, turn headlamp ON, wait until headlamp enters to the stable status (approximately 5 minutes after turning headlamp ON), and then check that headlamp operates normally without blinking or flickering.
  3. In the warm LED status (turn headlamp ON for more than 15 minutes and wait for 1 minute after turning OFF), turn ON and turn OFF headlamp for the several times. Check that headlamp operates normally each time.
  4. Turn headlamp ON for approximately 30 minutes, and then check that headlamp operates normally without difference in brightness between LH and RH, blinking or flickering.
Is the inspection result normal?
YES>>
Inspection End.
NO>>
Refer to Symptom Table.

Diagnosis and Repair Work Flow

Work Flow Work Flow OVERALL SEQUENCE DETAILED FLOW GET INFORMATION FOR SYMPTOM Get detailed information from the customer ...

Dtc/circuit Diagnosis

...

Other materials:

Diagnosis and repair workflow
Work Flow OVERALL SEQUENCE DETAILED FLOW 1. OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred. >> GO TO 2. 2. CONFIRM THE SYMPTOM Check the malfunction on the ...

Abs branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the abs actuator and electric unit (control unit) for damage, bend and loose connection (unit side and connector side). ...

The Steering Switches Are Inoperative
Description Description One or more of the steering switches to control the information display are inoperative. Diagnosis Procedure Diagnosis Procedure CHECK STEERING SWITCH CIRCUIT Check steering switch circuit. Refer to Diagnosis Procedure (st ...