Description
One or more of the steering switches to control the information display are inoperative.
Diagnosis Procedure
CHECK STEERING SWITCH CIRCUIT
Check steering switch circuit. Refer to Diagnosis Procedure (steering switch signal A) or Diagnosis Procedure (steering switch signal B).
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace harness or connector.
CHECK STEERING SWITCH RESISTANCE
Check steering switch resistance. Refer to Component Inspection (steering switch signal A) or Component Inspection (steering switch signal B).
Is the inspection result normal?
YES >>GO TO 3.
NO >>Replace steering switch. Refer to Removal and Installation.
CHECK COMBINATION SWITCH (SPIRAL CABLE)
Check combination switch (spiral cable) for continuity. Refer to Component Inspection (steering switch signal A) or Component Inspection (steering switch signal B).
Is the inspection result normal?
YES >>Replace combination meter. Refer to Removal and Installation.
NO >>Replace spiral cable. Refer to Removal and Installation.
The Fuel Gauge Indicator Does Not Operate
The Illumination Control Switch Is InoperativeEngine control system
Symptom Table
SYSTEM — BASIC ENGINE CONTROL SYSTEM
1 - 6: The numbers refer to the order of inspection.
(continued on next table)
SYSTEM — ENGINE MECHANICAL & OTHER
1 - 6: The numbers refer to the order of inspection. ...
Work Flow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW THE CUSTOMER FOR THE
SYMPTOM
Interview the customer for the symptom (the
condition and the environment when the incident/malfunction
occurs).
...
P27b5-00 Control Module
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...