Nissan Sentra B18 (2020-2025) Service Manual: Instrument Finisher B
Removal and Installation
Removal and Installation
REMOVAL
Using a
suitable tool, release pawls to detach cluster lid A (1) from
steering column upper cover (2).
:
Pawl
Remove the
steering column ...
Removal and Installation
Removal and Installation
Remove
cluster lid A. Refer to Removal and Installation.
Using a
suitable tool, release pawls and remove instrument side finishers
[1 (LH/RH)]. Note:
...
Other materials:
Dtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Turn heated seat switch LH (HIGH) ON.
Select “ ...
Component Inspection
Component Inspection
CHECK TRUNK LID OPENER REQUEST
SWITCH
Ignition switch OFF.
Disconnect trunk lid opener request switch
connector.
...
P0524 Engine oil pressure
DTC Logic
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P0524
ENGINE OIL PRESSURE
(Engine oil pressure too low)
An EOP sensor signal voltage applied to
ECM remains lower than the specified ...
