Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
Remove cluster lid A. Refer to Removal and Installation.
Using a
suitable tool, release pawls and remove instrument side finishers
[1 (LH/RH)]. 
Note: 
LH shown; RH similar
:
Pawl
Remove instrument lower panel LH. Refer to Removal and Installation.
Remove glove box assembly. Refer to Removal and Installation.
Remove center console assembly. Refer to Removal and Installation.
Using a
suitable tool, release clips. 
: Metal clip
Disconnect aspirator hose (with automatic air conditioner) and remove instrument finisher B (1).
INSTALLATION
Installation is in the reverse order of removal.
Cluster Lid a
...
Other materials:
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...
System description
Component parts
Component parts location
Instrument lower finisher
Component description
Sport mode switch
The sport mode switch is installed to the instrument lower finisher.
When the sport mode indicator lamp on the combination meter
is off and the sport mode switch is pres ...
P0743 Torque converter
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P0743
TORQUE CONVERTER
(Torque Converter Clutch Circuit
Electrical)
The TCM torque converter clutch solenoid
valve current monitor ...
