Nissan Sentra B18 (2020-2025) Service Manual: Inspection
INSPECTION AFTER REMOVAL
Check the stabilizer bar, the stabilizer connecting rods, the stabilizer bushings, and the stabilizer clamps for deformation, cracks or damage. Replace components if necessary.
INSPECTION AFTER INSTALLATION
Check the neutral position of the steering angle sensor. Refer to Description.
Check the wheel alignment. Refer to Inspection.
Removal and Installation
Removal and Installation
REMOVAL
Remove the
wheel and tire using power tool. Refer to Removal and Installation.
Remove the
nut and disconnect the stabilizer connecting rod from the
...
Steering Knuckle
...
Other materials:
Removal and Installation
Removal and
Installation
REMOVAL
For M/T models, drain the M/T oil.
Refer to Draining.
Remove disc brake rotor. Refer to Removal and Installation.
CAUTION:
Do not depress the brake pedal while the brake
caliper is removed.
Remove the wheel sensor bolt. Posi ...
Units
Units
The UNITS given in this manual are primarily expressed as the SI
UNIT (International System of Unit), and alternatively expressed in
the metric system and in the yard/pound system.
Also with regard to tightening torque of bolts
and nuts, there are de ...
P10c3 Internal Control Module Fuel Injector
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
