Nissan Sentra B18 (2020-2025) Service Manual: Units
-
The UNITS given in this manual are primarily expressed as the SI UNIT (International System of Unit), and alternatively expressed in the metric system and in the yard/pound system.
Also with regard to tightening torque of bolts and nuts, there are descriptions both about range and about the standard tightening torque.
“Example”
Range
Outer Socket Lock Nut
: 59 - 78 N·m (6.0 - 8.0 kg-m, 43 - 58 ft-lb)
Standard
Drive Shaft Installation Bolt
: 44.3 N·m (4.5 kg-m, 33 ft-lb)
Terms
Terms
The captions WARNING and CAUTION
warn you of steps that must be followed to prevent personal injury
and/or damage to some part of the Nissan Sentra vehicle.
W ...
Contents
Contents
THE CONTENTS are listed on the first page
of each section.
THE TITLE is indicated on the upper
portion of each page and shows the part or system. ...
Other materials:
C1606 EPS Motor
DTC Logic
DTC DETECTION LOGIC
Dtc
Display item
Malfunction detected condition
Possible cause
C1606
EPS MOTOR
When the motor driver malfunction of EPS control
unit or EPS motor malfunction is detected.
Harness or connector
EPS motor
Eps control ...
Component Function Check
Component Function
Check
Note:
Before performing the diagnosis, check that the
following items are normal:
Interior room lamp power supply circuit
Front room/map lamp assembly bulb
Rear personal lamp bulb
CHECK INTERIOR ...
Main line between ipdm-e and dlc circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and loose
connection (connector side
and harness side).
Harness connector e4
Harness connec ...
