Nissan Sentra B18 (2020-2025) Service Manual: In-Vehicle Sensor
Removal and Installation
REMOVAL
Remove instrument finisher B. Refer to Removal and Installation.
Remove
screw (A) and remove in-Nissan Sentra vehicle sensor (1). 
INSTALLATION
Installation is in the reverse order of removal.
Ambient Sensor
Removal and Installation
Removal and Installation
REMOVAL
Remove
front bumper. Refer to Removal and Installation.
Disconnect
the harness connector (A) from the ambient sensor (1). ...
Sunload Sensor
Removal and Installation
Removal and Installation
REMOVAL
Using a
suitable tool, release the pawls and remove sunload sensor (1) from
instrument panel assembly (2).
...
Other materials:
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...
Diagnosis and Repair Work Flow
Work Flow
Work Flow
Note:
“DTC” includes DTC at the 1st trip.
OBTAIN INFORMATION ABOUT SYMPTOM
Refer to Diagnostic Work Sheet and
interview the customer to obtain the malfunction information
(conditions and environment when the malfunction occurred)
...
Service
Service
Do not use electrical test equipment to check SRS
circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch
OFF, disconnect both battery cables and wait at least three
minutes.
For approxim ...
