Nissan Sentra B18 (2020-2025) Service Manual: Headlamp (hi)
Component Inspection
Component Inspection
-
CHECK HEADLAMP (HI) 1
-
-
Ignition switch OFF.
-
Disconnect front combination lamp connector.
-
Check continuity between front combination lamp terminals.
Front combination lamp
Continuity
Terminals
3
2
Yes
-
Is the inspection result normal?
YES >>GO TO 2.
NO >>Replace corresponding headlamp (HI) bulb. Refer to Bulb Replacement.
-
-
CHECK HEADLAMP (HI) BULB SOCKET AND HARNESS 1
-
-
Remove headlamp (HI) bulb.
-
Check continuity between front combination lamp terminals.
Front combination lamp
Continuity
Terminal
3
2
No
-
Is the inspection result normal?
YES >>Inspection End.
NO >>Repair or replace the headlamp (HI) bulb socket or harness.
-
Other materials:
C1733-68 Tire Pressure Sensor Rl
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure rep ...
Symptom Diagnosis
System Settings Cannot Be Turned On/off on the Integral Switch
Symptom Table
Symptom Table
CAUTION:
Perform the “Self Diagnostic Result” with
CONSULT before the symptom diagnosis. Perform the trouble diagnosis if
any DTC is detected.
...
Engine Mounting Insulator (lh)
Exploded View
Exploded View
CVT Models
1.
Engine mounting
insulator (LH)
2.
Engine mounting
insula ...