Diagnosis ProcedureDiagnosis Procedure
Diagnosis Procedure
CHECK DTC WITH COMBINATION METER
Check that DTC is not detected with combination
meter.
Refer to DTC Index (with Type A meter) or DTC Index (with Type B meter).
Is the inspection result normal?
...
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
at least 10 seconds before conducting the next test.
>&g ...
Parking Brake Switch Signal Circuit
Component Function Check
Component Function
Check
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
Select “PKB SW” in “Data Monitor” mode of “METER/M&A”.
Check tha ...