Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Steering / Steering Control System :: Dtc/circuit Diagnosis / U0073-00 Can Comm Circuit / Confirmation Procedure

Confirmation Procedure

PRECONDITIONING
1. If “Confirmation Procedure” has been previously conducted, always place the ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>
GO TO 2.
DTC REPRODUCTION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Select “Self Diagnostic Result” mode of “EPS/DAST 3”.
Is DTC “U0073-00” detected?
YES >>
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis cont ...

Other materials:

Inspection
Inspection If a compressor is malfunctioning (internal noise, insufficient cooling), check the compressor oil. COMPRESSOR OIL JUDGMENT Remove the compressor. Refer to Removal and Installation. ...

Removal and installation
Horn Exploded view Horn high Horn low Front Note: Shown with the front fascia removed for clarity. Removal and installation Horn low Removal Remove the core support cover. Refer to ext-23, "removal and installation". Disconnect the horn low harness connectors. ...

Receiving a call
When a call is placed to the connected phone, the display will change to phone mode. To accept the incoming call, either: Press the button on the steering wheel, or Touch the green phone icon on the screen. To reject the incoming call, either: Press the button on the ...