Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Component Inspection

Component Inspection

  1. CHECK FRONT SEAT BELT BUCKLE SWITCH LH

      1. Ignition switch OFF.

      2. Disconnect the front seat belt buckle switch LH.

      3. Check continuity between the front seat belt buckle switch LH terminals.

        Terminal

        Condition

        Continuity

        1

        2

        When front seat belt LH is fastened

        No

        When front seat belt LH is unfastened

        Yes

    Is the inspection result normal?

    YES >>

    Inspection End.

    NO >>

    Replace the front seat belt buckle switch LH. Refer to Removal and Installation.

Diagnosis Procedure
Diagnosis Procedure CHECK BCM INPUT SIGNAL Ignition switch ON. Check voltage between BCM ...

Parking Brake Switch Signal Circuit
...

Other materials:

Manual transmission (if so equipped)
WARNING Do not downshift abruptly on slippery roads. This may cause a loss of control. Do not over-rev the engine when shifting to a lower gear. This may cause a loss of control or engine damage. Do not shift to the N (Neutral) position while driving. Doing so may ...

Description
Description All doors do not lock/unlock using door request switch or trunk does not open using trunk opener request switch or Intelligent Key button. SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) ...

Precaution for work
When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the component with a ...

В© 2014-2026 Copyright www.nisentra.com