Nissan Sentra manuals

Toyota Camry Owner's Manual (2023): Dynamic radar cruise control with full-speed range

Toyota Camry Owner's Manual (2023) / Driving / Using the driving support systems / Dynamic radar cruise control with full-speed range

Summary of functions

In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.

Use the dynamic radar cruise control with full-speed range on freeways and highways.

System Components

■ Meter display

  1. Multi-information display
  2. Set speed
  3. Indicators

Using the driving support systems

■ Operation switches

  1. Vehicle-to-vehicle distance switch
  2. "+ RES" switch
  3. Cruise control main switch
  4. Cancel switch
  5. "- SET" switch

Using the driving support systems

WARNING

■Before using dynamic radar cruise control with full-speed range

■Cautions regarding the driving assist systems

Observe the following precautions, as there are limitations to the assistance provided by the system.

Failure to do so may cause an accident resulting in death or serious injury.

■Situations unsuitable for dynamic radar cruise control with full-speed range

Do not use dynamic radar cruise control with full-speed range in any of the following situations.

Doing so may result in inappropriate speed control and could cause an accident resulting in death or serious injury.

Notification function - RSA (Road Sign Assist)
In the following situations, the RSA system will notify the driver. When the vehicle speed exceeds the speed notification threshold of the speed limit sign displayed, the sign display will be em ...

Driving in vehicle-to-vehicle distance control mode - Dynamic radar cruise control with full-speed range
This mode employs a radar to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suitab ...

Other materials:

P0506 ISC System
Description The ECM controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine ...

Basic inspection
Diagnosis and repair work flow Work flow OVERALL SEQUENCE DETAILED FLOW 1.INTERVIEW FOR MALFUNCTION Find out what the customer's concerns are. >> GO TO 2 2.SYMPTOM CHECK Verify the symptom from the customer's information. >> GO TO 3 3.BASIC INSPECTION Check the operation ...

Both side front fog lamps are not turned on
Description The front fog lamps do not turn on in any setting. Diagnosis procedure 1.Combination switch (lighting and turn signal switch) inspection Check the combination switch (lighting and turn signal switch). Refer to bcs-72, "symptom table" (with intelligent key system) or bcs- ...

© 2014-2023 Copyright www.nisentra.com