Toyota Camry: Driving
- Before driving
- Driving the vehicle
- Sudden start restraint control (Drive-Start Control [DSC] )
- Cargo and luggage
- Vehicle load limits
- Trailer towing
- Driving procedures
- Engine (ignition) switch (vehicles without a smart key system)
- Engine (ignition) switch (vehicles with a smart key system)
- Changing engine switch modes
- Automatic transmission
- Changing shift ranges in S mode
- Turn signal lever
- Parking brake
- Electric parking brake
- Brake Hold
- Operating the lights and wipers
- Headlight switch
- AHB (Automatic High Beam)
- Windshield wipers and washer
- Changing the windshield wiper rest position/Lifting the windshield wipers
- Refueling
- Using the driving support systems
- Toyota Safety Sense 2.5+
- PCS (Pre-Collision System)
- Changing settings of the pre-collision system - PCS (Pre-Collision System)
- LTA (Lane Tracing Assist)
- Functions included in LTA system - LTA (Lane Tracing Assist)
- Indications on multi-information display - LTA (Lane Tracing Assist)
- RSA (Road Sign Assist)
- Notification function - RSA (Road Sign Assist)
- Dynamic radar cruise control with full-speed range
- Driving in vehicle-to-vehicle distance control mode - Dynamic radar cruise control with full-speed range
- Adjusting the set speed - Dynamic radar cruise control with full-speed range
- Approach warning (vehicle-to-vehicle distance control mode) - Dynamic radar cruise control with full-speed range
- Selecting constant speed control mode - Dynamic radar cruise control with full-speed range
- Dynamic radar cruise control
- Driving in vehicle-to-vehicle distance control mode - Dynamic radar cruise control
- Adjusting the set speed - Dynamic radar cruise control
- Approach warning (vehicle-to-vehicle distance control mode) - Dynamic radar cruise control
- Selecting constant speed control mode - Dynamic radar cruise control
- Driving assist systems
- When the TRAC/VSC systems are operating - Driving assist systems
- BSM (Blind Spot Monitor)
- BSM function - BSM (Blind Spot Monitor)
- Intuitive parking assist
- Display - Intuitive parking assist
- Changing the buzzer sounds volume - Intuitive parking assist
- RCTA (Rear Cross Traffic Alert)
- RCTA function - RCTA (Rear Cross Traffic Alert)
- RCD (Rear Camera Detection)
- PKSB (Parking Support Brake)
- Parking Support Brake function - PKSB (Parking Support Brake)
- Parking Support Brake function (static objects)
- Parking Support Brake function (rear-crossing vehicles)
- Driving mode select switches
- Driving tips
READ NEXT:
Driving the vehicle
The following procedures should be observed to ensure safe
driving:
Driving
1. With the brake pedal depressed, shift the shift lever to D.
2. Release the parking brake.
3. Gradually release the b
Sudden start restraint control (Drive-Start Control [DSC] )
When the following unusual operation is performed with the accelerator
pedal depressed, the engine output may be restrained.
When the shift lever is shifted to R*.
When the shift lever is shift
SEE MORE:
Engine
ENGINE HINT: Perform these procedures after the engine has cooled down.
INSPECT DRIVE BELT (a) Check the drive belt. A25A-FKS: Click here
2GR-FKS: Click here
INSPECT ENGINE OIL (a) Check the engine oil.
A25A-FKS: Click here
2GR-FKS: Click here
REPLACE ENGINE OIL AND OIL FILTE
Components
COMPONENTS ILLUSTRATION
*1 FRONT FLEXIBLE HOSE
*2 GASKET
*3 BRAKE LINE
*4 FRONT SPEED SENSOR
*5 UNION BOLT
- -
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm,
© 2023-2024 Copyright www.tocamry.com
