Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items (Trouble diagnosis content)

DTC detecting condition

B2F06-15

Back door/trunk opener switch

(Back door/trunk opener switch)

Diagnosis condition

Ignition switch ON

Signal (terminal)

Trunk lid opener switch signal (BCM connector terminal: 12)

Threshold

When the BCM detects the open or shorted circuit of the trunk lid opener switch

Diagnosis delay time

1 second or less

POSSIBLE CAUSE

FAIL-SAFE

B2f06-15 Back Door/trunk Opener Switch
...

Confirmation Procedure
Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON. ...

Other materials:

P062d Ecm
Dtc Description DTC Description This DTC is detected when the ECM-integrated injector driver unit has a malfunction. DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosi ...

After Replacing ECM
CHECK ‘OPERATION LOG’ With CONSULT Check Operation Log saved before replacing ECM, according to the procedure of “Programming” in CONSULT Operation Manual. Note: For the Nissan Sentra vehicle that the programming is to be performed ...

Brake pedal
Inspection BRAKE PEDAL HEIGHT Check the brake pedal height (H1) between the dash lower panel (1) and the brake pedal upper surface. Brake pedal height (H1) : Refer to BR-54, "Brake Pedal". CAUTION: Check the brake pedal height with the floor trim removed. STOP LAMP SWITCH AND BR ...

© 2014-2026 Copyright www.nisentra.com