Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Ignition switch OFF and wait at least 30 seconds.
-
Ignition switch ON and wait at least 2 seconds or more.
-
Select “Self Diagnostic Result” mode of “SONAR”.
-
Is DTC B2723 detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnos ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
DETERMINE MALFUNCTION TYPE
CONSULT
Ignition switch ON.
...
Other materials:
Precautions for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fro ...
6M/T
6M/T : Exploded View (LH)
Circular clip
Dust shield
Slide joint housing
Snap ring
Spider assembly
Boot band
Boot
Shaft
Damper band
Dynamic damper
Circular clip
Joint sub-assembly
Wheel side
6M/T : Disassembly and Assembly (LH)
DISASSEMBLY (WHEEL SIDE)
CAUTION:
...
Parking Brake Front Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
cup holder finisher. Refer to Exploded View.
Remove the
adjusting nut (A).
CAUTION:
Do not reuse the adjusting nut.
Pull the
equalizer (A) in the rearward direction and then in the upwa ...
