Nissan Sentra B18 (2020-2025) Service Manual: Parking Brake Front Cable
Removal and Installation
REMOVAL
Remove the cup holder finisher. Refer to Exploded View.
Remove the
adjusting nut (A). 
CAUTION:
Do not reuse the adjusting nut.
Pull the
equalizer (A) in the rearward direction and then in the upward
direction in order to separate the rear parking brake cables [LH/RH
(2)] from the front parking brake cable (1). 
CAUTION:
To prevent damage to parts, do not bend the parking brake cables.
Remove the front parking brake cable. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the adjustment. Refer to Adjustment.
-
Perform the inspection. Refer to Inspection.
CAUTION:
Do not reuse adjusting nut.
Parking Brake Control
Exploded View
Exploded View
1.
Parking brake lever
assembly
...
Parking Brake Rear Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
cup holder finisher. Refer to Exploded View.
Loosen the
adjusting nut (A).
CAUTION:
Do not reuse t ...
Other materials:
Diagnosis System (ipdm E/r)
Consult Function (ipdm E/r)
CONSULT Function (IPDM E/R)
IPDM E/R
Refer to CONSULT Function (IPDM E/R).
...
Engine Oil Pressure Sensor
Component Inspection
Component Inspection
CHECK EOP SENSOR
Turn ignition switch OFF.
Disconnect EOP sensor harness
connector.
Check resistance between EOP sensor
connector termi ...
Work Procedure (Before Replacing Electric
Throttle Control Actuator)
CHECK DTC
Perform DTC P0101 confirmation procedure.
Refer to Confirmation Procedure.
Is the DTC P0101 displayed?
YES >>
GO TO 2.
NO >>
Replace electric throttle control actuator.
Refer to Removal and ...
