Removal and Installation
REMOVAL
Remove the cup holder finisher. Refer to Exploded View.
Loosen the
adjusting nut (A).
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
Note:
It is not necessary to remove the front parking brake cable.
Pull the
equalizer (A) in the rearward direction and then in the upward
direction in order to separate the rear parking brake cables [LH/RH
(2)] from the front parking brake cable (1).
CAUTION:
To prevent damage to parts, do not bend the parking brake cables.
Remove the rear under cover (LH/RH). Refer to Removal and Installation.
Reposition the exhaust heat insulator.
Remove the rear parking brake cable from the underbody bracket.
Separate the rear parking brake cable from the toggle lever. Refer to Exploded View.
Remove the bolts from the rear parking brake cable. Refer to Exploded View.
Remove the rear parking brake cable from the Nissan Sentra vehicle.
INSTALLATION
Installation is in the reverse order of removal.
Perform the adjustment. Refer to Adjustment.
Perform the inspection. Refer to Inspection.
CAUTION:
Do not reuse the adjusting nut if the nut is removed.
Parking Brake Front Cable
Parking Brake SwitchRear-facing child restraint installation using LATCH
Refer to all Warnings and Cautions in the “Child
safety” and “Child restraints” sections before installing
a child restraint.
NISSAN does not recommend the use of the
lower anchors if the combined weight of the child
and the child restraint exceeds 65 lbs (29.5 kg). If
the combined w ...
P0171 Fuel Injection System Function
Dtc Description
DTC Description
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual
mixture ratio can be brought closely to the theoretical mixture ratio based on
the mixture ratio feedback signal from A/F sensor 1. The ECM calculatesthe
necessary compensation to corre ...
Component Parts
Rear Automatic Braking System
Component Parts Location
Component Parts Location
A.
Right side of instrument panel
(view with glove box assembly
removed)
...