Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Body Interior / Seat :: Dtc/circuit Diagnosis / B24ba-14 Front Heated Seat Relay Rh (lo) / Dtc Confirmation Procedure

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Turn heated seat switch RH (LOW) ON.
  3. Select “Self Diagnostic Result” mode of “HVAC”.
Is B24BA-14 detected?
YES>>
Refer to DTC Diagnosis Procedure.
NO>>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis name ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure CHECK FUSE Ignition switch OFF. Check that the following fuse is ...

Other materials:

P2618 Crankshaft Position Sensor
Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...

Configuration (adas Control Unit 2)
Description Description Since vehicle specifications are not included in the ADAS control unit 2 after replacement, it is required to write Nissan Sentra vehicle specifications using CONSULT. Configuration has three functions as follows: ...

Front Auxiliary Input Jacks Control Unit
Removal and Installation Removal and Installation Removal Remove instrument finisher B. Refer to Removal and Installation. Remove screw (A) from steering member (1). : Front ...