Nissan Sentra B18 (2020-2025) Service Manual / Body Interior / Seat :: Dtc/circuit Diagnosis / B24ba-14 Front Heated Seat Relay Rh (lo)

Nissan Sentra B18 (2020-2025) Service Manual: B24ba-14 Front Heated Seat Relay Rh (lo)

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen terms (Trouble diagnosis name)	DTC detection condition
B24BA-14	Front heated seat relay RH (LO) [Front heated seat relay right hand (low)]	Diagnosis	Heated seat switch RH (LOW) is OFF
		Signal (terminal)	Heated seat RH low relay control signal
		Threshold	Less than 2.5 V
		Diagnosis delay time	1 second or more

POSSIBLE CAUSE

Harness, fuse, or connectors
Heated seat RH low relay
A/C auto amp. (with auto A/C)
A/C amp. (with manual A/C)

FAIL-SAFE

—

Dtc Confirmation Procedure

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Turn heated seat switch RH (LOW) ON.
  3. Select “Self Diagnostic Result” mode of “HVAC”.
Is B24BA-14 detected?
YES>>
Refer to DTC Diagnosis Procedure.
NO>>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>
Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

CHECK FUSE

Ignition switch OFF.

Check that the following fuse is not blown (open):

Signal name	Fuse No.	Capacity
Ignition switch ON power supply	6	10 A

Is the inspection result normal?

YES >>

GO TO 2

NO >>

Replace the blown fuse after repairing the affected circuit.

CHECK HEATED SEAT RH LOW RELAY POWER SUPPLY

Disconnect heated seat RH low relay connector.
Ignition switch ON.

Check voltage between heated seat RH low relay harness connector and ground.

(+)	(-)	Voltage (Approx.)
M147	1	Ground	Battery voltage

(+)

(-)

Voltage

(Approx.)

Heated seat RH low relay

Connector

Terminal

M147

Ground

Battery voltage

Is the inspection result normal?

YES >>

GO TO 3.

NO >>

Repair or replace harness.

CHECK HEATED SEAT RH LOW RELAY
1. Check heated seat RH low relay.
  
  Refer to Refer to Component Inspection.
Is the inspection result normal?
YES >>
GO TO 4.
NO >>
Replace heated seat RH low relay.

CHECK HEATED SEAT RH LOW RELAY CONTROL SIGNAL

Connect heated seat RH low relay connector.

Check voltage between A/C auto amp. (with auto A/C) or A/C amp. (with manual A/C) harness connector and ground.

With auto A/C
(+)		(–)	Condition		Voltage (Approx.)
A/C auto amp.
Connector	Terminal
M34	76	Ground	Heated seat switch RH (LOW)	OFF	Battery voltage
M34	76	Ground	Heated seat switch RH (LOW)	ON	0 V

With manual A/C
(+)		(–)	Condition		Voltage (Approx.)
A/C amp.
Connector	Terminal
M82	76	Ground	Heated seat switch RH (LOW)	OFF	Battery voltage
M82	76	Ground	Heated seat switch RH (LOW)	ON	0 V

Is the inspection result normal?

YES >>

Replace A/C auto amp. (with auto A/C) or A/C amp. (with manual A/C). Refer to Removal and Installation (with auto A/C) or Removal and Installation (with manual A/C).

NO >>

GO TO 5.

CHECK HEATED SEAT RH LOW RELAY CONTROL SIGNAL CIRCUIT

Ignition switch OFF.
Disconnect A/C auto amp. connector (with auto A/C) or A/C. amp. connector (with manual A/C) and heated seat RH low relay connector.

Check continuity between A/C auto amp. harness connector (with auto A/C) or A/C. amp. harness connector (with manual A/C) and heated seat RH low relay harness connector.

With auto A/C
A/C auto amp.		Heated seat RH low relay		Continuity
Connector	Terminal	Connector	Terminal	Continuity
M34	76	M147	2	Yes

With manual A/C
A/C amp.		Heated seat RH low relay		Continuity
Connector	Terminal	Connector	Terminal	Continuity
M82	76	M147	2	Yes

Check continuity between A/C auto amp. harness connector (with auto A/C) or A/C amp. harness connector (with manual A/C) and ground.

With auto A/C
A/C auto amp.		(–)	Continuity
Connector	Terminal	(–)	Continuity
M34	76	Ground	No

With manual A/C
A/C amp.		(–)	Continuity
Connector	Terminal	(–)	Continuity
M82	76	Ground	No

Is the inspection result normal?

YES >>

GO TO 6.

NO >>

Repair or replace harness.

CHECK INTERMITTENT INCIDENT
1. Check intermittent incident.
  
  Refer to Intermittent Incident.
>>
Inspection End.

 B24ba-12 Front Heated Seat Relay Rh (lo)

Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis name) DTC detection condition B24BA-12 Front heated seat relay RH (LO) [Front...

 B24bc-12 Front Heated Seat Relay Rh (hi)

Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis name) DTC detection condition B24BC-12 Front heated seat relay RH (HI) [Front...

Other materials:

Seat. Precaution. Precautions
Precautions Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner" Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-T ...

Periodic Maintenance. Cvt Fluid
Cvt Fluid Inspection Inspection FLUID LEAKAGE Check transaxle surrounding area (oil seal and plug etc.) for fluid leakage. If transaxle appears to have oil seepage or a leak, follow the steps below to assist in a correct diagnosis. ...

Action Test
Ldw Work Procedure Work Procedure Perform action test to verify the customer's concern. Perform action test and check the system operation after system diagnosis. Warning: Be careful of traffic conditions and safety around the ...