Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
TIRE PRESSURE SENSOR ID REGISTRATION
-
Perform tire pressure sensor ID registration. Refer to Work Procedure.
GO TO 2.
-
-
PERFORM DTC CONFIRMATION
-
CONSULT-
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more reaches 10 minuets in total.
Note:
Avoid driving in areas with radio interference.
-
Stop the Nissan Sentra vehicle.
-
Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.
-
Is DTC “C1741-21” detected?
YES>>Refer to DTC Diagnosis Description.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional informatio ...
Other materials:
Bluetooth® Hands-Free Phone System without Navigation System (Type A) (if so
equipped)
WARNING
Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
If you are unable to devote full attention
to vehicle operation ...
Removal and Installation - Rear Seat Bolster
Removal and Installation - Rear Seat Bolster
REMOVAL
Warning:
Do not leave any objects (screwdrivers, tools,
etc.) on the rear seat bolster during seat repair. It can lead to
personal injury if the side air bag module should accidentally
deploy.
CAUTION:
...
P2614 Intake Camshaft Position Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
