Nissan Sentra B18 (2020-2025) Service Manual: Dtc/circuit Diagnosis
- C1040-04 Cut Valve
- C1051-04 Pump Motor
- C1058-04 Control Unit
- C105d-7b Brake Fluid Level Switch
- C105e-54 Pressure Sensor
- C1060-97 Wheel Sensor
- C1061-1d Wheel Sensor
- C106b-64 Stop Lamp Switch
- C106c-01 Pressure Sensor
- C106e-01 Steering Angle Sensor
- C106e-54 Steering Angle Sensor
- C1070-54 Side G Sensor
- C1073-01 Vacuum Sensor
- C1076-55 Control Unit
- C1083-86 Steering Angle Sensor System
- U0073-00 Can Comm Circuit
- U2156-87 Can Comm Circuit
- Power Supply and Ground Circuit
- Abs Warning Lamp
- Brake Warning Lamp
- Vdc Off Indicator Lamp
Configuration [abs Actuator and Electric Unit (control Unit)]
Work Procedure
Work Procedure
Note:
After configuration, place the ignition switch
from OFF to ON and check that the VDC warning lamp turns OFF after
staying illumi ...
C1040-04 Cut Valve
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen item
...
Other materials:
System description
Component parts
Component parts location
Ipdm e/r
System
Relay control system
Relay control system : system diagram
System diagram
Relay control system : system description
Ipdm e/r activates the internal control circuit to perform the relay on-off
control according to the inp ...
Precaution for Work
When removing or disassembling each component, be careful not to damage
or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
When removing (disengaging) components with a screwdriver or similar
tool, be sure to wrap the component
with a ...
Steering gear and linkage
Exploded View
REMOVAL
Steering gear assembly
Front suspension member
Front
Removal and Installation
REMOVAL
Set steering wheel to the straight-ahead position.
Remove floor cover (1).
Lower shaft assembly (2).
Remove the lower shaft assembly bo ...
