Nissan Sentra B18 (2020-2025) Service Manual: License Plate Lamp
Component Inspection
-
CHECK LICENSE PLATE LAMP 1
-
-
Ignition switch OFF.
-
Disconnect license plate lamp connector.
-
Check continuity between license plate lamp terminals.
License plate lamp
Continuity
Terminals
1
2
Yes
-
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace corresponding license plate lamp. Refer to Removal and Installation.
-
-
CHECK LICENSE PLATE LAMP 2
-
-
Remove license plate lamp bulb.
-
Check continuity between license plate lamp terminals.
License plate lamp
Continuity
Terminals
1
2
No
-
Is the inspection result normal?
YES >>Inspection End.
NO >>Repair or replace license plate lamp bulb socket or harness.
-
Tail Lamp
Component Inspection
Component Inspection
CHECK TAIL LAMP
Ignition switch OFF.
Disconnect ...
Stop Lamp
Component Inspection
Component Inspection
CHECK STOP LAMP 1
Ignition switch OFF.
Disconne ...
Other materials:
Tcm branch line circuit
Diagnosis Procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and loose
connection (unit side and connector
side).
TCM
Harness connector f50
Harness co ...
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
Strg branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the steering angle sensor for
damage, bend and loose connection
(unit side and connector side).
Is the inspection result ...
