Nissan Sentra Owners Manual: Driving the vehicle

Starting the engine (models with NISSAN Intelligent Key® system)

Apply the parking brake. Continuously Variable Transmission: Move the shift lever to P (Park) or N (Neutral). P (Park) is recommended. The starter is designed not to operate if the shif ...

Continuously Variable Transmission (CVT) (if so equipped)

WARNING Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Reverse), D (Drive) or L (Low). Always depress the brake pedal until shifting ...

Other materials:

U1000 Can comm circuit
Description CAN (Controller Area Network) is a serial communication line for real-time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent malfunction detection ability. Many electronic control units are equipped onto a vehicle, an ...

Map lamp
Removal and installation Removal Lower front edge of map lamp (1) down from the headlining by releasing the metal clips, then slide forward to clear pawls at rear. : Metal clip Pawl Disconnect the harness connectors from the map lamp and remove. Installation Installation is in t ...

Checking bulbs
With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: If equipped, the following lights come on briefly and then go off: If any light fails to come on, it may indicate an open circuit ...